Ceramic Coating For Commercial Trucks
While other truck owners are fine with basic protection, when you choose Gleamworks, you’re stepping up to the premium membership.
Our ceramic coating is highly durable, protecting your fleet from wear and tear and making it look great.
You can finally say goodbye to high maintenance costs and hello to stunning looks that make heads turn on the highway.
With our knowledge of larger vehicles, each truck gets the care it needs.
Trust us with the care of your vehicle for lustrous shine and unbeatable protection that shows the world you care about quality.
DRIVING
Why Choose Us
The Benefits of Ceramic Coating for Commercial Trucks
Ceramic coating isn’t just a luxury; it’s a smart investment for your commercial truck.
When you pick Gleamworks, you select a service that brings your truck’s original paint job to life.
Wherever our expertise is added, it saturates and brightens like never before.
Envision bringing your ride back to that beautiful look it had when it first came out of the lot.
This is the transformation that our ceramic coating can provide.
One of the major benefits of ceramic coatings is longevity. With care and maintenance, these coatings can last for years. This longevity makes them a cost-effective solution in the long run.
Some products even offer lifetime warranties, so your vehicle keeps its appearance without regular touch-ups or reapplications.
Time-Saving Convenience
For busy professionals, time is of the essence.
According to a recent survey, 80% of car lovers spend less time washing their ceramic-coated cars. Those without this protective layer invest a far greater amount of time in the chore.
This translates to more time on the road and less in the wash bay.
With ceramic coatings, dirt and gunk slide right off, making maintenance easy. It’s like a protective shield that keeps your truck cleaner longer.
Exceptional Protection
Ceramic coatings offer an impressive level of protection.
They can even withstand extreme temperatures—up to 1,500°F (815°C)—without degrading.
This resilience keeps your truck safe from damaging environmental influences.
It shields against UV rays, road salt, and more.
When applied by professionals, ceramic coatings bond tightly with your vehicle’s surface. This bond can extend the life of the protection to several years rather than just months.
Either way, you’ll have peace of mind knowing that your investment is protected from wear and tear.
About Us
The Importance of Ceramic
Coating for Commercial Trucks
Ceramic coating changes the game on how commercial trucks are protected.
It provides an additional layer to protect them from the brutal environments they often face. This protective finish stands up to scratches, UV rays, and environmental contaminants. It also keeps your vehicle looking great and preserves resale value.
At Gleamworks, we focus on using high-quality ceramic coatings designed for larger vehicles such as trucks.
Why Choose Professional Application?
Some truck owners attempt to apply ceramic coating themselves. The professionals get the most effective results because they know the subtle things to do.
For example, we are a team of experts who know the ins and outs of caring for large vehicles like RVs and semi-trucks. We’ve got the track record to prove it, and our service is second to none.
Customers love us—95% report being satisfied and come back for repeat business!
You may be able to save time and ensure it lasts longer if you have your truck professionally coated by an auto care shop.
It usually costs between $20 and $40 per foot. It really depends on the vehicle’s size and the job’s complexity.
What to Expect During the Process
- We begin with a thorough inspection of your truck to determine its specific needs.
- The surface is cleaned and prepped to ensure optimal bonding of the ceramic coating.
- Using advanced techniques, we apply the ceramic coating evenly across all surfaces.
- After application, we allow adequate time for the coating to cure properly.
Benefits of Ceramic Coating for Your Truck
Our experience has shown that the majority of truck drivers do best with a single kit.
Consider having additional kits available for larger vehicles or simply for more extensive coverage.
ASK US ABOUT CQUARTZ PROFESSIONAL TODAY!
FEATURES:
SPECIFICATIONS:
What Is Ceramic Coating?
Definition and Composition
Ceramic coating is a specialized protective layer that bonds to your truck’s paint, creating a durable shield.
Ceramic coatings provide long-term protection that lasts for years. In comparison, standard waxes or paint sealants last only a few months.
Composed of nano-ceramic particles, this coating creates a superior barrier against a variety of environmental elements. You can use it not just on paint but on glass and metal surfaces too.
This ensures that your vehicle gets the full protection it needs.
How It Works on Trucks
When applied to commercial trucking, ceramic coatings work by repelling water, dirt, and UV rays.
This means that your truck will not only look good, but it will continue to look this way over time.
The coat’s hydrophobic characteristics reduce the adherence of impurities to the surface, making cleaning significantly easier.
It also greatly reduces the chance of harm from damaging UV rays. This is particularly important for operators who drive for long hours, given UV rays can lead to skin cancer.
The lifespan of a nano-ceramic coating depends on a few key variables. These include the storage environment, annual distances traveled, and the types of contaminants it encounters.
Investing in ceramic coating for your commercial truck adds to the look of the vehicle. It protects your investment!
Common Misconceptions
There’s a misconception that ceramic coatings are one-size-fits-all or make a vehicle scratch-proof.
While they do provide a huge amount of protection, there’s a caveat.
Ceramic coatings provide a beautiful glossy finish and keep your paint looking fresh. However, these aren’t the best choice for every type of paint or surface.
Some people believe that ceramic coating is as simple as spraying it on. You can apply it in various ways, such as with spray bottles or dedicated applicators. More often than not, you’ll want to double up layers, so you have some extra insurance.
Specific Advantages for Commercial Fleets
Reducing Fleet Maintenance Costs
One of the most notable benefits of ceramic coating for commercial trucks is its effectiveness at reducing maintenance costs.
Save your fleet from the hassle of frequent waxing and polishing with a high-quality ceramic coating. Otherwise, you can pay as much as $89 an hour for these services!
This protective layer doesn’t just keep your vehicles looking pristine; it also means that you can reduce the frequency of detailing services.
Wider savings can accumulate over time, helping your business to better redirect funds.
Ceramic coatings are meant to be long-lasting. With adequate care, they’ll last for five years or longer.
This durability translates into fewer applications and less time spent on upkeep, which means lower overall maintenance expenses.
Improving Vehicle Resale Value
Investing in ceramic coating can enhance the resale value of your commercial trucks.
A vehicle that’s well maintained with a brilliant shine is more appealing to buyers.
Ceramic coatings excel at protecting against minor scratches and rock chips. They also protect your paint from swirl marks that can detract from your car’s appearance.
Keep your fleet looking new and polished. This increases your vehicles’ resale value down the line.
The cost savings from ceramic coatings can be significant.
They can save fleets up to 50% of the cost of repainting when it comes time to refresh a vehicle’s look.
It looks great, but investing in quality protection is about more than fashion.
That’s a good business decision, and it opens up the pocketbook.
Consistent Brand Image and Appearance
For commerce with fleets of cars using their vehicles as part of the brand, it is critical to keep a uniform image.
Ceramic coating offers an unparalleled level of shine that elevates the professional look of your fleet.
When all your trucks shine with that glossy finish, you create a strong brand image. This look also demonstrates your dedication to attention to detail.
Ceramic coatings are flexible in every sense of the word.
They can be applied to many different surfaces, including fiberglass, metal, and glass, which means they are perfect for any type of commercial vehicle.
This flexibility helps you keep each vehicle in your fleet looking consistent.
That allows you to reinforce your brand through the car.
Application Process for Ceramic Coating
Preparing the Truck Surface
The hardest part of applying the ceramic coating isn’t the application — it’s preparing the truck. This step ensures that the coating adheres properly and provides maximum protection.
First, wash the truck to get dirt, grime, and whatever wax or sealant is already on there off.
Next, decontaminate the paint with a clay bar to remove embedded contaminants that regular washing doesn’t.
If needed, do any paint correction or polishing to bring the surface back to life.
It’s important to work in a climate-controlled space between 65 and 75 degrees Fahrenheit.
This environment ensures the best conditions for the coating to bond.
Applying the Coating Step-by-Step
Once your truck is prepped, it’s application time.
Here’s a simple step-by-step guide:
- Gather your applicator pad or microfiber cloth and ceramic coating product.
- Apply a few drops of ceramic coating onto your applicator pad or cloth. Work on one section at a time, applying in straight lines or circular motions.
- It’s recommended to apply the coating in small areas, such as 3′ x 3′, ensuring that each section slightly overlaps with the previous one.
- After allowing it to set for a few minutes, gently wipe off any excess product with a clean microfiber cloth.
- Continue this process until you have covered all desired areas of the truck.
By taking these steps diligently, you’ll end up with an even and long-lasting finish that adds shine and protection.
Post-Application Care and Curing
Once you apply the ceramic coating, proper care is essential for long-lasting results.
The coating takes at least a week to cure completely.
After you’ve applied the treatment, don’t wash your truck for at least 24 hours.
Keep it away from water for a full 48 hours, too.
Ongoing maintenance is also important; wash your truck regularly with pH-neutral soap.
Use a dedicated maintenance spray specifically for ceramic coatings to keep it looking pristine.
Maintenance of Ceramic Coated Trucks
Regular Cleaning Practices
To maintain your ceramic-coated truck, consistent cleaning is a must.
Ceramic coatings outperform regular waxes and paint sealants. With the right care, they can last way longer, and you won’t have to reapply every few months.
Start by washing your truck every two weeks to wash away dirt and contaminants that can dull the finish. Use a pH-neutral soap specifically designed for ceramic coatings to avoid damaging the protective layer.
It’s important to always clean with a soft microfiber cloth or mitt to avoid scratching.
Rinse well to remove any remaining soap.
After washing, you can apply a spray-on ceramic booster to boost the hydrophobic properties of the coating and add shine. It’s a simple step that increases the durability of the coating. It also provides an additional layer of protection from the elements.
Avoiding Common Mistakes
Ceramic coatings provide excellent protection, but there are key ceramic coating mistakes that can undermine their effectiveness.
One big blunder is skipping regular maintenance.
The longevity of a nano-ceramic coating on your truck is variable. It’s affected by factors like the environment it’s stored in and even the type of contaminants it’s exposed to.
Another common mistake is using harsh chemicals or abrasive materials when cleaning. These can scratch the surface and damage the coating. Always choose products specifically designed for ceramic finishes.
Whenever possible, park your truck in the shade. Extended exposure to direct sunlight can cause damage from harmful UV rays on the paint and coating.
Invest in high-quality window film that comes with a 9H-rated nano-ceramic coating. This shield will protect you from harmful UV exposure that studies show increases skin cancer risk for commercial vehicle operators.
Professional Maintenance Services
If you want to leave things to the professionals, some will even maintain the aquarium.
When your truck gets a professional tune-up, it’s getting the service it deserves while you don’t have to fret about handling it.
Professional detailing typically costs anywhere from $20 to $40 per foot. This price varies based on the vehicle’s state and the services you select.
Keep in mind that up to 90% of the cost of ceramic coating comes from man-hours spent decontaminating and detailing. The coating itself is only a small fraction of the total cost.
A professional service keeps your vehicle looking great. It also cuts down on the time and effort you’ll need to spend keeping it looking good.
Key Considerations Before Coating
Assessing Vehicle Condition
Before you even think about applying ceramic coating to your commercial truck, you need to check its present status.
Is the paint in good shape, or are there scratches and blemishes that need to be addressed?
Properly prepared surfaces are critical for successful coatings application. Older vehicles, particularly those with fiberglass body panels, may have a chalky gelcoat that makes applying the coating more challenging.
This means you should probably do some paint correction work before you apply the ceramic coating.
Understanding Different Coating Options
There are many different ceramic coating options, with varying levels of protection and durability. Which one is right for you will depend on your unique needs and budget.
Ceramic coatings form an impenetrable shield over your truck’s paint. With proper application and maintenance, this protection can last for several years.
DIY kits are available to use; however, they are often not of the quality you would expect from professional-grade products. It is necessary to evaluate the feasibility of learning how to apply a quality product vs. The risk of using a bad one.
Evaluating Professional vs. DIY Application
Weighing professional application vs. A DIY approach is another major factor.
Hiring the professionals ensures expert application. This is important, especially as detailing commercial vehicles can cost approximately $89 per hour in average man-hour fees.
It’s costly to repaint an RV or semi-truck. On average, it costs anywhere from $50,000 to $200,000!
In comparison, ceramic coating can be a more affordable choice for long-term protection.
If you opt for a DIY project, be prepared to purchase two to three kits. This is particularly true if you plan to coat more than the painted exterior panels.
Gentle practices are key when cleaning a coated vehicle to maintain its protection.
You can hire a pro or do it yourself. Knowing about these factors will allow you to make an informed choice.
Is Ceramic Coating Right for Your Truck?
Factors to Consider for Decision-Making
Consider the essential elements when selecting ceramic coating for your commercial truck. You want to make the right decision because it can make a difference in how your truck looks and how well it’s protected.
First and foremost, consider the long shelf life of the product. Ceramic coatings outlast standard waxes and paint sealants. While the latter need to be reapplied year after year, ceramic coatings can last 4-6 years or more.
This translates into less time spent maintaining and more time spent on the road.
Next, think about what it protects you against.
If you frequently drive long distances, get a ceramic coating for your truck. It protects your vehicle from the elements and helps it look its best.
It also protects your car from the elements, which may mean less expensive repainting or detailing in the future.
That brings us to the consideration of cost.
Professional application can cost anywhere from 50 to 200 dollars an hour, and material can add up. On the surface, the price looks steep.
Keep in mind that a “Class A” paint job typically costs between $50,000 and $200,000. Ceramic coating is more cost-effective in the long run.
Finally, make sure you use a reputable installer. The success of the coating lies in proper preparation and application.
The coating needs a well-prepped surface to adhere to. If it’s poorly installed, you might have the dreaded thunderstorm at some point in your life, which is why it’s important to spend money on an experienced technician.
Case Studies of Successful Applications
To demonstrate the advantages ceramic coating can have on commercial trucks, let’s examine a few successful case studies.
- A local freight company decided to apply ceramic coatings to their entire fleet of trucks. After two years of use, they reported impressive savings on maintenance costs. They also found that their trucks stayed cleaner longer. The coating did a great job of resisting road grime and UV damage.
- An independent hauler who drives cross-country chose ceramic coating for his rig. He noticed it drastically decreased how often he had to wash his truck. It helped keep his truck looking immaculate, regardless of what the elements decided to throw at it. The investment paid off by preventing wear and tear in the long run.
These examples illustrate how ceramic coatings can enhance the aesthetics and durability of your vehicle.
You’ll save money on repairs and maintenance by investing in them.
01
Protection Against Environmental Damage
02
Enhanced Aesthetic Appeal
03
Cost-Effective Maintenance
04
Longevity and Durability
05
Scratch and Chip Resistance
After you submit the form, a representative will call you back with the information you’ll need to make an appointment.